Originally published at: Demos we'll have at Embedded World 2024 - Golioth
We are returning to Embedded World in 2024 (EW24) and will be showing off the things we’ve been working on at Golioth since last year. We’re also living a little closer to the edge and bringing some experiments and unreleased items to showcase on the floor. Demo gods, be kind! We’ll be at the Zephyr booth, helping to showcase one of our favorite Real Time Operating Systems and Ecosystems (though not the only one we support!). Golioth generally only targets one part in our standard hardware setup, but we continuously verify a bunch of hardware on our Firmware SDK. This means that you can be certain that every new feature added to the Golioth Cloud and SDK is fully tested throughout our supported hardware. The great thing about Zephyr is that the underlying hardware works very similarly to all of our CVBs, because of the work from the silicon vendors that participate in the open source project. We’re excited because 2024 saw even more silicon vendors joining the fray! Golioth Demos Being part of a large project like Zephyr, we share time at the booth Kiosks. We’ll be at the Zephyr Booth at the following times (all times CEST, which is GMT + 1): Tuesday, April 9th from 1500 to 1800 Wednesday, April 10th from 1200 to 1500 Thursday, April 11th from 0900 to 1130 Here’s some of the hardware we’ll have on hand: Modbus Vibration monitor – This is our newest Reference Design that captures vibration and temperature data from a sensor normally used in industrial environments for large motors. The hardware in the Reference Design talks over RS-485 to the remote sensor and queries all of the available…
1 Like